Thank you for your purchase! Follow this guide to install and use your drawer divider.
Extends from 11" to 17.7" to fit most standard drawers.
No tools required. Simply snap into place and adjust.
Divide drawers into compartments that suit your needs.
Product image coming soon
Measure the inner width of your drawer. Make sure it falls between 11" (28cm) and 17.7" (45cm).
Hold both ends of the divider and gently pull or push to match your drawer width. You'll hear a click at each position.
Place the divider into the drawer. Position it where you want to create a separation. The spring-loaded ends will grip the drawer walls.
Push firmly on both ends to ensure a tight fit. Gently tug the divider to confirm it's securely in place.
Hold both ends and pull outward smoothly. Each click indicates a locked position.
Press the side buttons (if equipped) and push both ends inward simultaneously.
For best results, adjust to slightly wider than your drawer, then compress when inserting for a snug fit.
Do not exceed the maximum length of 17.7". Over-extending may damage the divider.
Works best in drawers with smooth, flat inner walls. Uneven surfaces may affect grip.
Clean the drawer walls before installation for better adhesion and stability.
Keep away from children under 3 years old. Small parts may pose a choking hazard.
For extra stability in wider drawers, use two dividers crossed at a 90-degree angle.
To remove, simply pull one end away from the wall at a slight angle and slide out.
If you have any questions or need assistance, please don't hesitate to contact us through your Amazon order page.